|
This trampoline mat is for the Bounce Pro 14' trampoline. It has 72 triangles. This trampoline replacement mat is made out of Grade A Permatron Polypropylene.
It actually measures about 150" from black edge to edge. This trampoline has 6 legs.
This trampoline mat fits the 14' Bounce Pro Models; TR-1463A-Flex-FZ, TR-14-63A, TR-1463A-FLEX-WM and TR-1686-TPR
It may also fit other brands. Please feel free to contact our office for further assistance at 1-800-872-6765.
Colored Sunguard gives the jumper a perimeter/guideline to keep them away from the edge of the trampoline. Making a safer jumper experience.
Colors may vary in either black or blue. If you would prefer one of the two colors more, please indicate in the checkout notes and we will do our best to accommodate your needs.
Option Sunguard "recommended"
Description: The sunguard is a strip of webbing stitched "over" the hem, the outside edge of the trampoline mat. This provides protection against premature Dry-Rot/Aging from the Sun's UV rays. This SUNGUARD will incread the life of your trampoline mat's stitching for several years. This can be added to replacement mats. Colors May Vary!
HOW TO MEASURE ROUND BEDS
If your frame is assembled!
1. WITH A MEASURING TAPE THE FULL LENGTH (DIAMETER) OF YOUR TRAMPOLINE, MEASURE ACROSS THE MIDDLE, FROM OUTSIDE TO OUTSIDE OF THE FRAME. NOTE THE EXACT INCHES. (The measurement of one leg post to the opposite leg post will help insure you are measuring across the middle of the trampoline.) THIS IS A 12 O'CLOCK TO A 6 O'CLOCK MEASUREMENT.
2. MEASURE AGAIN ACROSS THE MIDDLE, THE DIAMETER OF THE FRAME, BUT WITH A 9 O'CLOCK TO A 3 O'CLOCK MEASUREMENT. NOTE THE EXACT INCHES. (Do not round off or convert to feet and inches.)
3. IF YOU HAVE YOUR MAT (AND IT DOES NOT HAVE A TEAR); MEASURE JUST THE BLACK PART, EDGE TO EDGE. DO NOT INCLUDE THE TRIANGLES. MEASURE TWICE LIKE STEPS ONE AND TWO DESCRIBED. NOTE THE EXACT INCHES.
4. COUNT HOW MANY SPRINGS IT TAKES. COUNT HOW MANY SPRING HOLES IN THE FRAME FOR MORE ACCURACY. (Then count how many springs you have, in good condition, recoiled and with lots of tension. You may be missing springs or want more tension)
5. TAKE A SPRING OFF THE TRAMPOLINE & MEASURE IT INCLUDING THE HOOKS TO DETERMINE THE CORRECT LENGTH. (The spring coils must be fully recoiled to obtain the proper length.
|