132"x132" (11' x 11') Square Trampoline Mat With 84 Rings - For 13x13 SKYWALKER Trampoline

We recommend adding a Sunguard to your mat!

We offer our USA MADE SUNGUARD in Many Different Colors 
There is also an example pictured above.
THIS WILL ONLY BE FOR THE SUNGUARD, NOT THE COMPLETE MAT!

      SUNGUARD BENEFITS

• Prolongs the life of your trampoline
• Adds 2 Year Warranty on Stitching
• Colored Sunguard gives the jumper a perimeter/guideline
• Gives a safer jumping experience
• Comes in Many Colors

1. Measure the frame.  You will measure the length and width of the frame from outside frame to outside frame.  To get the most accurate measurement it is best to measure along the edge of the frame, as shown in the diagram to the left.
2. Measure the springs.  You will take a spring OFF the trampoline, make sure that it is fully recoiled and measure it from hook-end to hook-end.  It is very important that you not use a stretched-out spring and that the spring NOT be attached to the trampoline to get an accurate measurement.
3. Count the springs.  You will count the springs down each side of the trampoline.  We suggest that you also count your springs to make sure that you are not missing any.
4. Measure the mat.  If possible, it is best to measure the mat while still attached to the frame.  You will measure the mat from hem to hem down each side, DO NOT INCLUDE THE V-RINGS.  Note the exact inches of the measurement.