Jumping Mat for 14' Airborne JumpKing Trampoline

The jumping mat for the JumpKing 14' Airborne Trampoline is 12' and it has 96 triangles. This is a 12ft trampoline mat to fit the 14' models and is made by Trampolines USA at our warehouse in Texas. Please be sure to measure your metal trampoline frame and be sure that it is 14' in diameter with 96 springs measuring 8.5" springs.

This trampoline holds 96 springs that are 8.5" from hook to hook. (SPRINGS NOT INCLUDED)

SUNGUARD colored Sunguard gives the jumper a perimeter/guideline to keep them away from the edge of the trampoline. Making a safer jumper experience.

HOW TO MEASURE  ROUND BEDS

 

If your frame is assembled!

 

1. WITH A MEASURING TAPE THE FULL LENGTH (DIAMETER) OF YOUR TRAMPOLINE, MEASURE ACROSS THE MIDDLE, FROM OUTSIDE TO OUTSIDE OF THE FRAME. NOTE THE EXACT INCHES. (The measurement of one leg post to the opposite leg post will help insure you are measuring across the middle of the trampoline.) THIS IS A 12 O'CLOCK TO A 6 O'CLOCK MEASUREMENT.

 

2. MEASURE AGAIN ACROSS THE MIDDLE, THE DIAMETER OF THE FRAME, BUT WITH A 9 O'CLOCK TO A 3 O'CLOCK MEASUREMENT. NOTE THE EXACT INCHES. (Do not round off or convert to feet and inches.)

 

3. IF YOU HAVE YOUR MAT (AND IT DOES NOT HAVE A TEAR); MEASURE JUST THE BLACK PART, EDGE TO EDGE.  DO NOT INCLUDE THE TRIANGLES. MEASURE TWICE LIKE STEPS ONE AND TWO DESCRIBED. NOTE THE EXACT INCHES.

 

4. COUNT HOW MANY SPRINGS IT TAKES. COUNT HOW MANY SPRING HOLES IN THE FRAME FOR MORE ACCURACY. (Then count how many springs you have, in good condition, recoiled and with lots of tension. You may be missing springs or want more tension)

 

5. TAKE A SPRING OFF THE TRAMPOLINE & MEASURE IT INCLUDING THE HOOKS TO DETERMINE THE CORRECT LENGTH. (The spring coils must be fully recoiled to obtain the proper length.